Unlocking the secrets of fusion’s core with AI-enhanced simulations
by Julianna Mullen | Plasma Science and Fusion Center
Boston MA (SPX) Feb 20, 2025
Creating and sustaining fusion reactions – essentially recreating star-like conditions on Earth – is extremely difficult, and Nathan Howard PhD ’12, a principal research scientist at the MIT Plasma Science and Fusion Center (PSFC), thinks it’s one of the most fascinating scientific challenges of our time. “Both the science and the overall promise of fusion as a clean energy source are really interesting. That motivated me to come to grad school [at MIT] and work at the PSFC,” he says.
Howard is member of the Magnetic Fusion Experiments Integrated Modeling (MFE-IM) group at the PSFC. Along with MFE-IM group leader Pablo Rodriguez-Fernandez, Howard and the team use simulations and machine learning to predict how plasma will behave in a fusion device. MFE-IM and Howard’s research aims to forecast a given technology or configuration’s performance before it’s piloted in an actual fusion environment, allowing for smarter design choices. To ensure their accuracy, these models are continuously validated using data from previous experiments, keeping their simulations grounded in reality.
In a recent open-access paper titled “Prediction of Performance and Turbulence in ITER Burning Plasmas via Nonlinear Gyrokinetic Profile Prediction,” published in the January issue of Nuclear Fusion, Howard explains how he used high-resolution simulations of the swirling structures present in plasma, called turbulence, to confirm that the world’s largest experimental fusion device, currently under construction in Southern France, will perform as expected when switched on. He also demonstrates how a different operating setup could produce nearly the same amount of energy output but with less energy input, a discovery that could positively affect the efficiency of fusion devices in general.
The biggest and best of what’s never been built
Forty years ago, the United States and six other member nations came together to build ITER (Latin for “the way”), a fusion device that, once operational, would yield 500 megawatts of fusion power, and a plasma able to generate 10 times more energy than it absorbs from external heating. The plasma setup designed to achieve these goals – the most ambitious of any fusion experiment – is called the ITER baseline scenario, and as fusion science and plasma physics have progressed, ways to achieve this plasma have been refined using increasingly more powerful simulations like the modeling framework Howard used.
In his work to verify the baseline scenario, Howard used CGYRO, a computer code developed by Howard’s collaborators at General Atomics. CGYRO applies a complex plasma physics model to a set of defined fusion operating conditions. Although it is time-intensive, CGYRO generates very detailed simulations on how plasma behaves at different locations within a fusion device.
The comprehensive CGYRO simulations were then run through the PORTALS framework, a collection of tools originally developed at MIT by Rodriguez-Fernandez. “PORTALS takes the high-fidelity [CGYRO] runs and uses machine learning to build a quick model called a ‘surrogate’ that can mimic the results of the more complex runs, but much faster,” Rodriguez-Fernandez explains. “Only high-fidelity modeling tools like PORTALS give us a glimpse into the plasma core before it even forms. This predict-first approach allows us to create more efficient plasmas in a device like ITER.”
After the first pass, the surrogates’ accuracy was checked against the high-fidelity runs, and if a surrogate wasn’t producing results in line with CGYRO’s, PORTALS was run again to refine the surrogate until it better mimicked CGYRO’s results. “The nice thing is, once you have built a well-trained [surrogate] model, you can use it to predict conditions that are different, with a very much reduced need for the full complex runs.” Once they were fully trained, the surrogates were used to explore how different combinations of inputs might affect ITER’s predicted performance and how it achieved the baseline scenario. Notably, the surrogate runs took a fraction of the time, and they could be used in conjunction with CGYRO to give it a boost and produce detailed results more quickly.
“Just dropped in to see what condition my condition was in”
Howard’s work with CGYRO, PORTALS, and surrogates examined a specific combination of operating conditions that had been predicted to achieve the baseline scenario. Those conditions included the magnetic field used, the methods used to control plasma shape, the external heating applied, and many other variables. Using 14 iterations of CGYRO, Howard was able to confirm that the current baseline scenario configuration could achieve 10 times more power output than input into the plasma. Howard says of the results, “The modeling we performed is maybe the highest fidelity possible at this time, and almost certainly the highest fidelity published.”
The 14 iterations of CGYRO used to confirm the plasma performance included running PORTALS to build surrogate models for the input parameters and then tying the surrogates to CGYRO to work more efficiently. It only took three additional iterations of CGYRO to explore an alternate scenario that predicted ITER could produce almost the same amount of energy with about half the input power. The surrogate-enhanced CGYRO model revealed that the temperature of the plasma core – and thus the fusion reactions – wasn’t overly affected by less power input; less power input equals more efficient operation. Howard’s results are also a reminder that there may be other ways to improve ITER’s performance; they just haven’t been discovered yet.
Howard reflects, “The fact that we can use the results of this modeling to influence the planning of experiments like ITER is exciting. For years, I’ve been saying that this was the goal of our research, and now that we actually do it – it’s an amazing arc, and really fulfilling.”
Research Report:“Prediction of performance and turbulence in ITER burning plasmas via nonlinear gyrokinetic profile prediction”
Related Links
Magnetic Fusion Experiments Integrated Modeling Group
Powering The World in the 21st Century at Energy-Daily.com
